这是我学校电子设计时做的，可以d琴，也有几首歌在里面。。你应该看得懂#include <reg52h> #define uchar unsigned char
#define uint unsigned int
#define ulong unsigned long
sbit BEEP=P2^0; //喇叭输出脚uchar th0_f; //在中断中装载的T0的值高8位
uchar tl0_f; //在中断中装载的T0的值低8位
uchar key;/------------------------------------------------
函数声明
------------------------------------------------/
uchar keyscan(void);//键盘扫描程序
void delay(uint i); //延时子程序/-------- T0的值,及输出频率对照表 --------------/
uchar code freq[362]={
0xA9,0xEF, //0x3F,0XEE,//00220HZ ,1 //0
0x93,0xF0, //0X3D,0XEF,//00233HZ ,1#
0x73,0xF1, //0X30,0XF0,//00247HZ ,2
0x49,0xF2, //0X18,0XF1,//00262HZ ,2#
0x07,0xF3, //0XE6,0XF1,//00277HZ ,3
0xC8,0xF3, //0XB7,0XF2,//00294HZ ,4
0x73,0xF4, //0X71,0XF3,//00311HZ ,4#
0x1E,0xF5, //0X2A,0XF4,//00330HZ ,5
0xB6,0xF5, //0XCF,0XF4,//00349HZ ,5#
0x4C,0xF6, //0X72,0XF5,//00370HZ ,6
0xD7,0xF6, //0X09,0XF6,//00392HZ ,6#
0x5A,0xF7, //0X97,0XF6,//00415HZ ,7
0xD8,0xF7, //0X20,0XF7,//00440HZ 1 //12
0x4D,0xF8, //0X9F,0XF7,//00466HZ 1# //13
0xBD,0xF8, //0X18,0XF8,//00494HZ 2 //14
0x24,0xF9, //0X88,0XF8,//00523HZ 2# //15
0x87,0xF9, //0XF3,0XF8,//00554HZ 3 //16
0xE4,0xF9, //0X59,0XF9,//00587HZ 4 //17
0x3D,0xFA, //0X05,0XFA,//00622HZ 4# //18
0x90,0xFA, //0X13,0XFA,//00659HZ 5 //19
0xDE,0xFA, //0X66,0XFA,//00698HZ 5# //20
0x29,0xFB, //0XB9,0XFA,//00740HZ 6 //21
0x6F,0xFB, //0X05,0XFB,//00784HZ 6# //22
0xB1,0xFB, //0X4D,0XFB,//00831HZ 7 //23
0xEF,0xFB, //0X90,0XFB,//00880HZ `1
0x2A,0xFC, //0XD0,0XFB,//00932HZ `1#
0x62,0xFC, //0X0C,0XFC,//00988HZ `2
0x95,0xFC, //0X44,0XFC,//01046HZ `2#
0xC7,0xFC, //0X7B,0XFC,//01109HZ `3
0xF6,0xFC, //0XAD,0XFC,//01175HZ `4
0x22,0xFD, //0XDD,0XFC,//01244HZ `4#
0x4B,0xFD, //0X0A,0XFD,//01318HZ `5
0x73,0xFD, //0X35,0XFD,//01397HZ `5#
0x98,0xFD, //0X5D,0XFD,//01480HZ `6
0xBB,0xFD, //0X83,0XFD,//01568HZ `6#
0xDC,0xFD, //0XA6,0XFD,//01661HZ `7 //35
};//定时中断0,用于产生唱歌频率
timer0() interrupt 1
{
TL0=tl0_f;TH0=th0_f; //调入预定时值
BEEP=~BEEP; //取反音乐输出IO
}//音乐符号串解释函数
//入口:要解释的音乐符号串,输出的音调串,输出的时长串
changedata(uchar song,uchar diao,uchar jie)
{
uchar i,i1,j;
char gaodi; //高低+/-12音阶
uchar banyin;//有没有半个升音阶
uchar yinchang;//音长
uchar code jie7[8]={0,12,14,16,17,19,21,23}; //C调的7个值
diao=song;
for(i=0,i1=0;;)
{
gaodi=0; //高低=0
banyin=0;//半音=0
yinchang=4;//音长1拍
if(((song+i)=='|') || ((song+i)==' ')) i++;
//拍子间隔和一个空格过滤
switch((song+i))
{
case ',': gaodi=-12;i++;//低音
break;
case '`': gaodi=12;i++; //高音
break;
}
if((song+i)==0) //遇到0结束
{
(diao+i1)=0; //加入结束标志0
(jie+i1)=0;
return;
}
j=(song+i)-0x30; i++; //取出基准音
j=jie7[j]+gaodi; //加上高低音
yinc: switch((song+i))
{
case '#': //有半音j加一个音阶
i++;j++;
goto yinc;
case '-': //有一个音节加长
yinchang+=4;
i++;
goto yinc;
case '_': //有一个音节缩短
yinchang/=2;
i++;
goto yinc;
case '': //有一个加半拍
yinchang=yinchang+yinchang/2;
i++;
goto yinc;
}
(diao+i1)=j; //记录音符
(jie+i1)=yinchang; //记录音长
i1++;
}
}//奏乐函数
//入口:要演奏的音乐符号串
void play(uchar songdata)
{
uchar i,c,j=0;
uint n;
uchar diaodata[48]; //音调缓冲
uchar jiedata[48]; //音长缓冲
changedata(songdata,diaodata,jiedata); //解释音乐符号串
TR0=1;
for(i=0;diaodata[i]!=0;i++) //逐个符号演奏
{
tl0_f=freq[diaodata[i]2]; //取出对应的定时值送给T0
th0_f=freq[diaodata[i]2+1];
for(c=0;c<jiedata[i];c++) //按照音长延时
{ key = keyscan();
for(n=0;n<29500;n++); // 29500
if(key != 0xff)//((!K1)||(!K2)||(!K3)||(!K4))//发现按键,立即退出播放
{
TR0=0;
return;
}
}
TR0=0;
for(n=0;n<460;n++); //460音符间延时
TR0=1;
}
TR0=0;
}//一分钱
uchar code yifenqian[]={
"5`1|6_`1_5|3_5_2_3_|5-|"
"3_5_6_`1_|5_6_5_3_|13__|2-|"
"3_2_1_2_|3-|6_5_3_5_|6-|"
"5_`1_6_5_|3_5_2|5_2_3_2_|1-|"
}; //世上只有妈妈好
uchar code mamahao[]={
"65_35|`16_5_6-|35_6_53_2_|1_,6_5_3_2-|"
"23_55_6_|321-|53_2_1_,6_1_|,5--"
};
//找朋友
uchar code zhaopengyou[]={ "5_6_5_6_|5_6_5|5_`1_7_6_|5 3|"
"5_5_3_4_|5_5_3|1_4_3_2_|1_2_1|"
};
//茉莉花
uchar code molihua[]={"33_5_6_`1_`1_6_|55_6_5-|33_5_6_`1_`1_6_|55_6_5-|"
"5553_5_|665-|32_3_53_2_|11_2_1|"
//"3_2_1_3_23_|56_`1_5-|23_5_2_3_1_,6_|,5-,61|"
//"23_1_2-1_,6_|,5--"
};
//新年好
uchar code xinnianhao[]={
"1_1_1 ,5|3_3_3 1|1_3_5 5|4_3_2-|"
"2_3_4-|3_2_3 1|1_3_2 ,5|,7_2_1-|"
};
//小星星
uchar code xingxing[]={
"1155|665-|4433|221-|"
"5544|332-|5544|332-|"
"1155|665-|4433|221-|"
};
//外婆的澎湖湾
uchar code waipodephw[]={
"3_5_5_5_6_`1_6_5_|`1_`1_`1_6_5-|"
"`3_`3_`3_`3_`4_`3_`2_`1_|`2_`2_`2_`3_`2-|"
"`3_`3_`3_`3_`4_`3_`2_`1_|6_`1_`1_6_5-|"
};
}
#include "reg52h"
unsigned char Count;
sbit led2 =P2^0;
unsigned char code SONG[] ={ //祝你平安
0x26,0x20,0x20,0x20,0x20,0x20,0x26,0x10,0x20,0x10,0x20,0x80,0x26,0x20,0x30,0x20,
0x30,0x20,0x39,0x10,0x30,0x10,0x30,0x80,0x26,0x20,0x20,0x20,0x20,0x20,0x1c,0x20,
0x20,0x80,0x2b,0x20,0x26,0x20,0x20,0x20,0x2b,0x10,0x26,0x10,0x2b,0x80,0x26,0x20,
0x30,0x20,0x30,0x20,0x39,0x10,0x26,0x10,0x26,0x60,0x40,0x10,0x39,0x10,0x26,0x20,
0x30,0x20,0x30,0x20,0x39,0x10,0x26,0x10,0x26,0x80,0x26,0x20,0x2b,0x10,0x2b,0x10,
0x2b,0x20,0x30,0x10,0x39,0x10,0x26,0x10,0x2b,0x10,0x2b,0x20,0x2b,0x40,0x40,0x20,
0x20,0x10,0x20,0x10,0x2b,0x10,0x26,0x30,0x30,0x80,0x18,0x20,0x18,0x20,0x26,0x20,
0x20,0x20,0x20,0x40,0x26,0x20,0x2b,0x20,0x30,0x20,0x30,0x20,0x1c,0x20,0x20,0x20,
0x20,0x80,0x1c,0x20,0x1c,0x20,0x1c,0x20,0x30,0x20,0x30,0x60,0x39,0x10,0x30,0x10,
0x20,0x20,0x2b,0x10,0x26,0x10,0x2b,0x10,0x26,0x10,0x26,0x10,0x2b,0x10,0x2b,0x80,
0x18,0x20,0x18,0x20,0x26,0x20,0x20,0x20,0x20,0x60,0x26,0x10,0x2b,0x20,0x30,0x20,
0x30,0x20,0x1c,0x20,0x20,0x20,0x20,0x80,0x26,0x20,0x30,0x10,0x30,0x10,0x30,0x20,
0x39,0x20,0x26,0x10,0x2b,0x10,0x2b,0x20,0x2b,0x40,0x40,0x10,0x40,0x10,0x20,0x10,
0x20,0x10,0x2b,0x10,0x26,0x30,0x30,0x80,0x00};
void Time0_Init()
{
TMOD = 0x01;
IE = 0x82;
TH0 = 0xD8;
TL0 = 0xEF; //12MZ晶振，10ms
}
void Time0_Int() interrupt 1
{
TH0 = 0xD8;
TL0 = 0xEF;
Count++; //长度加1
}
/-------------------------------------------------
功能:1MS延时子程序
-------------------------------------------------/
void Delay_xMs(unsigned int x)
{
unsigned int i,j;
for( i =0;i < x;i++ )
{
for( j =0;j<3;j++ );
}
}
void Play_Song(unsigned char i)
{
unsigned char Temp1,Temp2;
unsigned int Addr;
Count = 0; //中断计数器清0
Addr = i 217;
while(1)
{
Temp1 = SONG[Addr++];
if ( Temp1 == 0xFF ) //休止符
{
TR0 = 0;
Delay_xMs(100);
}
else if ( Temp1 == 0x00 ) //歌曲结束符
{
return;
}
else
{
Temp2 = SONG[Addr++];
TR0 = 1;
while(1)
{
// _Speak = ~_Speak;
led2=~led2;
Delay_xMs(Temp1);
if ( Temp2 == Count )
{
Count = 0;
break;
}
}
}
}
}
/-------------------------------------------------
功能:主程序
-------------------------------------------------/
void main()
{
Time0_Init(); //定时器0中断初始化
while(1)
{
Play_Song(0); //播放
}
}
蜂鸣器播放
蜂鸣器不能唱歌，只会有调子，不知道显示歌词有什么用，
此外，你给的分太少了，我只给你蜂鸣器唱歌的程序，
一个是单纯的如何让蜂鸣器播放音乐，
一个是红外遥控播放音乐，音乐部分就只在MUSICC里面，你看一下就行了，
乐音是由物体振动发出的，如果你的蜂鸣器的发声频率大约等于乐音的频率，那么就能发出类似的调子，具体的音符频率表在我给的PDF的第30页。
再奉送你一个专门单片机编歌谱曲的软件。
#include "reg51h"
unsigned char Count;
sbit _Speak =P2^3 ; //蜂鸣器控制脚
unsigned char code SONG[] ={ //祝你平安，以下为编码
0x26,0x20,0x20,0x20,0x20,0x20,0x26,0x10,0x20,0x10,0x20,0x80,0x26,0x20,0x30,0x20,0x30,
0x20,0x39,0x10,0x30,0x10,0x30,0x80,0x26,0x20,0x20,0x20,0x20,0x20,0x1c,0x20,0x20,0x80,
0x2b,0x20,0x26,0x20,0x20,0x20,0x2b,0x10,0x26,0x10,0x2b,0x80,0x26,0x20,0x30,0x20,0x30,
0x20,0x39,0x10,0x26,0x10,0x26,0x60,0x40,0x10,0x39,0x10,0x26,0x20,0x30,0x20,0x30,0x20,
0x39,0x10,0x26,0x10,0x26,0x80,0x26,0x20,0x2b,0x10,0x2b,0x10,0x2b,0x20,0x30,0x10,0x39,
0x10,0x26,0x10,0x2b,0x10,0x2b,0x20,0x2b,0x40,0x40,0x20,0x20,0x10,0x20,0x10,0x2b,0x10,
0x26,0x30,0x30,0x80,0x18,0x20,0x18,0x20,0x26,0x20,0x20,0x20,0x20,0x40,0x26,0x20,0x2b,
0x20,0x30,0x20,0x30,0x20,0x1c,0x20,0x20,0x20,0x20,0x80,0x1c,0x20,0x1c,0x20,0x1c,0x20,
0x30,0x20,0x30,0x60,0x39,0x10,0x30,0x10,0x20,0x20,0x2b,0x10,0x26,0x10,0x2b,0x10,0x26,
0x10,0x26, 0x10,0x2b,0x10,0x2b,0x80,0x18,0x20,0x18,0x20,0x26,0x20,0x20,0x20,0x20,0x60,
0x26,0x10,0x2b,0x20,0x30,0x20,0x30,0x20,0x1c,0x20,0x20,0x20,0x20,0x80,0x26,0x20,0x30,
0x10,0x30,0x10,0x30,0x20,0x39,0x20,0x26,0x10,0x2b,0x10,0x2b,0x20,0x2b,0x40,0x40,0x10,
0x40,0x10,0x20,0x10,0x20,0x10,0x2b,0x10,0x26,0x30,0x30,0x80,0x00,
//路边的野华不要采 , 以下为这首歌的编码
0x30,0x1C,0x10,0x20,0x40,0x1C,0x10,0x18,0x10,0x20,0x10,0x1C,0x10,0x18,0x40,0x1C,0x20,
0x20,0x20,0x1C,0x20,0x18,0x20,0x20,0x80,0xFF,0x20,0x30,0x1C,0x10,0x18,0x20,0x15,0x20,
0x1C,0x20,0x20,0x20,0x26,0x40,0x20,0x20,0x2B,0x20,0x26,0x20,0x20,0x20,0x30,0x80,0xFF,
0x20,0x20,0x1C,0x10,0x18,0x10,0x20,0x20,0x26,0x20,0x2B,0x20,0x30,0x20,0x2B, 0x40,0x20,
0x20,0x1C,0x10,0x18,0x10,0x20,0x20,0x26,0x20,0x2B,0x20,0x30,0x20,0x2B,0x40,0x20,0x30,
0x1C,0x10,0x18,0x20,0x15,0x20,0x1C,0x20,0x20,0x20,0x26,0x40,0x20,0x20,0x2B,0x20,0x26,
0x20,0x20,0x20,0x30,0x80,0x20,0x30,0x1C,0x10,0x20,0x10,0x1C,0x10,0x20,0x20,0x26,0x20,
0x2B,0x20,0x30,0x20,0x2B,0x40,0x20,0x15,0x1F,0x05,0x20,0x10,0x1C,0x10,0x20,0x20,0x26,
0x20,0x2B,0x20,0x30,0x20,0x2B,0x40,0x20,0x30,0x1C,0x10,0x18,0x20,0x15,0x20,0x1C,0x20,
0x20,0x20, 0x26,0x40,0x20,0x20,0x2B,0x20,0x26,0x20,0x20,0x20,0x30,0x30,0x20,0x30,0x1C,
0x10,0x18,0x40,0x1C,0x20,0x20,0x20,0x26,0x40,0x13,0x60,0x18,0x20,0x15,0x40,0x13,0x40,
0x18,0x80,0x00, };
void Time0_Init() //定时器 0 初始化函数
{
TMOD = 0x01; //工作模式选择
IE = 0x82; //中断设置
TH0 = 0xD8; //装初值
TL0 = 0xEF; //12MZ 晶振，10ms
}
void Time0_Int() interrupt 1 //定时器 0 中断子函数
{
TH0 = 0xD8;
TL0 = 0xEF;
Count++; //长度加 1
}
/-------------------------------------------------
1MS 延时子程序
-------------------------------------------------/
void Delay_xMs(unsigned int x)
{
unsigned int i,j;
for( i =0;i < x;i++ )
{
for( j =0;j<3;j++ );
}
}
/-------------------------------------------------
功能:歌曲播放子程序 i 为播放哪一段曲目
-------------------------------------------------/
void Play_Song(unsigned char i)
{
unsigned char Temp1,Temp2;
unsigned int Addr;
Count = 0; //中断计数器清 0
Addr = i 217;
while(1)
{
Temp1 = SONG[Addr++];
if ( Temp1 == 0xFF ) //休止符
{
TR0 = 0;
Delay_xMs(100);
}
else if ( Temp1 == 0x00 ) //歌曲结束符
{
return;
}
else
{
Temp2 = SONG[Addr++];
TR0 = 1;
while(1)
{
_Speak = ~_Speak;
Delay_xMs(Temp1);
if ( Temp2 == Count )
{
Count = 0;
break;
}
}
}
}
}
/-------------------------------------------------
功能:主程序
-------------------------------------------------/
void main()
{
Time0_Init(); //定时器 0 中断初始化
while(1)
{
Play_Song(0); //播放
}
}
以上就是关于求51单片机蜂鸣器播放音乐的教程 C语言全部的内容，包括:求51单片机蜂鸣器播放音乐的教程 C语言、单片机c51，求一个如图的单片机音乐代码，相当于替换图上的音乐！求大神帮忙！、求一份C51单片机数字音乐盒（LCD1602显示歌词，歌词需与音乐同步）的课程设计。程序为C语言程序的。等相关内容解答，如果想了解更多相关内容，可以关注我们，你们的支持是我们更新的动力！
欢迎分享，转载请注明来源：内存溢出
微信扫一扫
支付宝扫一扫
评论列表（0条）